how much for a cat back exhaust?

[heist]

hey guys,

how much would a catback exhaust and a connon muffler be? im looking fo as cheap as possible, in sydney (92 si sedan).


thanks dudes

[nedgeworth]

well just got one put on mine on saturday. 2" cat back with 4" cannon. set me back $295 up here in brisbane.

[LVNIT]

I have had quotes for around $500 for cat back w/ Cannon Ball muffler :)

[joneblaze]

Around Sydney a catback should cost around $240-350. A cannon muffler will usually go for around $200-350.

[|N|]

any good place to get a cat back in syd?

[egvtec]

liverpool exhausts, got a 2 inch mandrel bent cat back for 250..................just add on the price of a cannon

[|N|]

liverpool exhausts, got a 2 inch mandrel bent cat back for 250..................just add on the price of a cannon

including the cat?

[aimre]

i payed a total of $475 for 2 inch mandrel stainless steel with a hotdog and muffler i bought of egSi (from ozhonda)

$300 catback at longlast exhaust
$175 muffler (nice muffler lol)

[heist]

well i have my old cannon off my 88 hb...if i cut it off at the end of the pipe (cos its welded onto the original 88 hb exhaust piping, which has bends and shit), would they just weld that to the 2'' madrel bent piping?

[joneblaze]

Yes, they can merely weld it onto your new catback piping.

Alot of people here would recommend Liverpool Exhaust for decent pricing. In some ways they are the "Tempe Tyres" of exhaust shops in Sydney, albeit with better customer service (sometimes) and I'm sure they don't drop/scratch/abuse your rims.

Fussy's in Lansvale is also touted to be a good joint to check out.

I find locating and speaking to your local exhaust shop (ie. Carline, Quickfit Mufflers, etc) would be another feasible option. One that doesn't require you to drive out to god knows farking where merely to be faced with rude service or even worse, shite workmanship. The trials and tribulations of having to continously waste time and petrol travelling out to these godforsaken suburbs merely to refix your rattling/farting/leaking/scraping new exhaust system can be circumvented with a simple flick through your local business directory (or Yahoo! Local Search on www.yahoo.com.au) and having a face to face or telephone chat with your local exhaust dude.

I've had abit of work done by my local Quickfit, they are top blokes, very easygoing and price fairly. They aren't completely inundated with modded 4cyl's going in and out of their place every 60 mins, meaning they can spend some time talking to you and answer any questions you might have.

Face it, it's not that fkn hard to weld a catback exhaust. Alot of these local dudes have been welding pipes well before we were old enough to sit in the family car without the babyseat. :)

[zigengt]

It really depends what you're after. A cheap set up will prob cost you about $300 or so

[EuroAccord13]

If you aren't fussy, a press bend system from the cat back with a zorst will save you quite abit of money.. Although I'd rather have a mandrel bend system

[Usual Suspect]

i got a 2.25" system including hotdog center muffler (ie nothing), a sports muffler (non cannon just bugger all baffling) and a chrome tip and a new front pipe for $290, but im in WA.

[pocketrocket]

Hi,

I just got a high-flow cat for my ED at liverpool exhuast which set me back $250. I also asked for a quote for a catback which was quoted at another $250, not including muffler as I already have an existing muffler. In addition I had my muffler installed and bought there for $330.

[LAGOOT]

i suggest FUSSY'S performance in lansvale. Top quality workmanship! Top guys too :thumbsup:

[tRipitaka]

Sorry for jacking the thread, but does anyone recommend any exhaust places in Melb ? I'm looking to do my exhaust, but not sure what places are good or not ?

[|N|]

i suggest FUSSY'S performance in lansvale. Top quality workmanship! Top guys too :thumbsup:

anyone has their contact details?

[pocketrocket]

Hi [N], Fussy's Motor Performace are located at:

16/62 Hume Hwy
Lansvale NSW 2166
Australia

Tan (Manager)
Mob: 0411 083 680
Ph: 9726 0058

Apprently the R32 Skyline (GTSPEC) which was posted stolen on this forum was prepped by them.

[LAGOOT]

Hi [N], Fussy's Motor Performace are located at:

16/62 Hume Hwy
Lansvale NSW 2166
Australia

Tan (Manager)
Mob: 0411 083 680
Ph: 9726 0058

Apprently the R32 Skyline (GTSPEC) which was posted stolen on this forum was prepped by them.
thanks for the contact info for them pocket :thumbsup:

[|N|]

Hi [N], Fussy's Motor Performace are located at:

16/62 Hume Hwy
Lansvale NSW 2166
Australia

Tan (Manager)
Mob: 0411 083 680
Ph: 9726 0058

Apprently the R32 Skyline (GTSPEC) which was posted stolen on this forum was prepped by them.

thank you ... ll call them when i get my car back ,,,

[UW15HN]

hey just to let you know on prices..

i got my canon tip installed from benfield carline exhausts for $45..
castle hill carline charge $160 for doing the same thing..

penrith muffler man do extractors, 2.5" pipeing and installation with 3" dump tip for $380..

maybe if you call these places and ask for a quote im sure it will be the cheapest in sydney area that i know of..

hope that helps.. im glad i asked around before i got mine installed just like the position you are in

cheers

[phantom_civic]

i got mine done at Fussys in lansvale for 200, just the piping from the cannon to the front pipe.


:)

[ACTI0NMAN-1]

Sorry for jacking the thread, but does anyone recommend any exhaust places in Melb ? I'm looking to do my exhaust, but not sure what places are good or not ?

BUmp for the same question,

"Sorry for jacking the thread, but does anyone recommend any exhaust places in Melb ? I'm looking to do my exhaust, but not sure what places are good or not?"

[Vivski]

BUmp for the same question,

"Sorry for jacking the thread, but does anyone recommend any exhaust places in Melb ? I'm looking to do my exhaust, but not sure what places are good or not?"

Yeah, why not... I wouldn't mind finding a good exhaust specialist for Hondas in Melbourne too.

[panda[cRx]]

lol it doesnt matter for HONDA or not... all the same shit yo