View Full Version : delsol wheel offset
sxmachine
16-11-2011, 08:14 PM
hey guys im looking at getting some work meister s1 on my del sol
im going 16x8 but not to sure what offset i can run,
guards are rolled but not flared
can anyone give me a ruff idea what offset these would be
http://i105.photobucket.com/albums/m234/gangster_035/delsol4.jpg
any help would be appreciated
thanks
lilthug
16-11-2011, 08:16 PM
http://www.rimtuck.com/search/datasheet&make=Honda&model=del+Sol&
sxmachine
16-11-2011, 08:26 PM
^ thanks mate
16x8 +30 what do you guys reckon
lilthug
16-11-2011, 08:36 PM
question is,
what do u think?
sxmachine
16-11-2011, 08:41 PM
yeh looks alright but like i said i dont even know nfn about offset lol tossing up between +25 or +30
JDM-EGG
16-11-2011, 08:42 PM
^ thanks mate
16x8 +30 what do you guys reckon
go 16x8 +20
i had 15x8 +20 on my eg , which is pretty much same chassis , had rolled - lips guards .. and was dumped on neutral camber , no srubbing issues
so going 16" its the same , just when u dump it ur car will be abit higher then 15"s thats all but same specs.
sxmachine
16-11-2011, 08:46 PM
got any pics ??? thanks for the help
90LAN
16-11-2011, 08:48 PM
35+
really depends what your going to use your car for
sxmachine
16-11-2011, 08:50 PM
its more a show car just going for a lil jdm look
http://www.ozhonda.com/forum/showthread.php?157670-meister-s12p-4-100-white-center-in-16-inch-special-offer-(1-set-only)&p=3153283#post3153283
just put the deposit down :)
JDM-EGG
16-11-2011, 09:00 PM
http://www.ozhonda.com/forum/showthread.php?155997-FS-WORK-EQUIP-01-15x8-20-WITH-TYRES-**************
this is 15x8 +20 O disk so it has abit more dish .. but cannot fit big brake calipers , wheres as urs has abit less dish but can fit type r brakes etc easily.
http://www.ozhonda.com/forum/showthread.php?155627-Fs-Honda-crx-delsol-with-jdm-b18-type-r-8600-********-PICS-UP-*********
look at this thread u can see the wheels on my delsol , but with it lowered and rolled guards will fit perfect like my eg
and remember u only buy wheels once ... so dont go something too weak ! honestly i got over mine very quick , sometimes i think i shouldve got 15x8 +15
sxmachine
16-11-2011, 09:08 PM
^ thanks for that ill probably go a 30+ just for a clean look
sxmachine
16-11-2011, 09:22 PM
im thinking 16x8.5 +30 rear and 16x8 +30 front does that sound alright or shit haha im a total noob at wheel fitment
JDM-EGG
16-11-2011, 09:27 PM
for civics and shit , i wouldnt got 8.5 , just go 8x and low offset of +25 under. plenty of civics and delsols rolling 15x8 +25 like axis OG's LOL !
hondar
16-11-2011, 09:49 PM
for civics and shit , i wouldnt got 8.5 , just go 8x and low offset of +25 under. plenty of civics and delsols rolling 15x8 +25 like axis OG's LOL !
agree..
dont go for staggered set unless absolutely necessary... go for 16x8 and low offset will be better :D
just as a benchmark 16x8 +25 A disk will give you 69mm dish, every offset you go lower, it add 1mm of dish, and vice versa if you go up.
sxmachine
16-11-2011, 09:52 PM
Yeah sound good I'll stick to 16x8 all round and tossing up between +25 or +30 I want to run bigger brakes and I seen that spoon calipers need +38 to fit them (correct me if wrong) so that should be alright ..
Edit
Made my mind up I'll be going +25
JDM-EGG
16-11-2011, 10:15 PM
good choice ! like i said before ur wheels are A disk which gives more brake clearance .. if u dont have enough for spoon , spacers will do the trick!
hope u enjoy ur work wheels like i did ! now im on 20" also from jdmconcept :) good bloke
sxmachine
16-11-2011, 10:17 PM
Thanks for that really appreciate it .. I'm so excited can't wait to get them
tiksie
17-11-2011, 12:22 AM
I wish they were 4x114.3!
$1500 so cheap for custom widths and offsets! 15x10.5 -49 would've looked great on my car :( fml
Snoop_gee
17-11-2011, 06:43 AM
sxmachine very much keen to see wat rims u will be getting.
cause with delsol's its all about the stance.
http://i729.photobucket.com/albums/ww294/mdmlteza/IMG_0422.jpg
http://i729.photobucket.com/albums/ww294/mdmlteza/IMG_0424.jpg
http://i729.photobucket.com/albums/ww294/mdmlteza/IMG_0442.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.