PDA

View Full Version : injectors


creativepunka
22-02-2005, 09:46 PM
hey im after some injectors for my d16y1, i dont want to go over 80% duty cycle and will run about 10 psi. iv already got a computer to run them. What does everyone recomend 400cc?? i want secondhandys and was thinking of getting some from the states and just getting them sent over.
Weq
22-02-2005, 09:49 PM
440's will do
Nuttz
23-02-2005, 12:45 AM
yeah you could try to find some ebay DSM 440cc's CHEEAAAPPP
STOCK
23-02-2005, 03:33 PM
whatever injectors you buy, if you plan on keeping your stock ecu you have to buy high impedance bosch style ones so it will fit back on your fuel rail without too many dramas.
creativepunka
23-02-2005, 06:12 PM
thats the other thing, will dms440s still fit in the fuel rail? i will be using stock ecu with a s-afc/v-afc controlling A/F.
Weq
23-02-2005, 07:33 PM
they will fit. u run ODB1 injector clips, so they are slot in with a resister box (or resisters wired inline custom)
creativepunka
24-02-2005, 06:48 PM
what would i pay for dms 440's and would i be best getting them from ebay usa? cheers guys
Nuttz
25-02-2005, 12:18 AM
yeah ebay has it all!!
i dont think there are many guys who ship to aus, but see if u can find them. I think the going cost is about $70US. so it comes to about $140AUS, whish is a pretty good price for 440cc injectors.

and dont forget to install resistors/resistor box as well.
pornstar
25-02-2005, 12:33 AM
u guys do realise that DSM injectors are just mitsubishi injectors right?....

just seems like u guys are going sick before u realise what they are...
pgclee
25-02-2005, 04:42 AM
get a H22a injector...cheap and good...more than you need as well..i think is either 290cc or 330cc...same as NSX...
creativepunka
27-02-2005, 02:01 PM
get a H22a injector...cheap and good...more than you need as well..i think is either 290cc or 330cc...same as NSX...

Na ill need bigger as im using a s-afc/v-afc.
barefootbonzai
28-02-2005, 03:02 PM
creativepunka, have you decided on what injectors you're goin with yet? Cause i'm gonna be doin the exact same as you too. 440CC injectors with V-AFC.
Disciple
01-03-2005, 11:25 PM
wouldnt u need to change ure fuel pump also?
creativepunka
02-03-2005, 07:28 PM
will be using DSM440cc. i changed my fuel pump to a commodore pump which flow good for what i want.
xKx_31
05-03-2005, 01:06 AM
Go try RC Engineering ones. USD$400. per pop for 4 x 750cc in most of the US websites.