Tein SS

[me_kevinly]

hey guys
i realise on the net
tein Jap website, the SS is EDFC Compatible
but on the tein US website, the SS is not EDFC Compatible

so which one is true??????

also does D2 coilover damper adjuctable?
thanks

[EK9]

Aparently the SS is compatible with the EDFC... i remember one of the traders or members saying it in the traders forum

Anyway, i'll move this to Sussy Tech... you'll get more replies since it's not ACCORD related.

*moved*

[JINRAI]

yes it is compatible

[PLYBOY]

and yes D2 is damper adjustable.. 36 point

[CONAN]

HMM
I thought only Tein Flex was compatible?

[me_kevinly]

HMM
I thought only Tein Flex was compatible?

thats the point im trying to make
on the US site
not all the Tein SS are compatible with EDFC

for eg. rsx ( type S) is compatible
but tsx (euro) is NOT compatible

[EK9]

well if u look carefully, the US and Jap Tein sites and products are completely different... that's wot i found wen looking at spring rates between same models... e.g. Tien SS for EK9 from US has harder springs then same coilover from Japan (sorry can't remember exactly if this is rite... but u get the point). There's a whole other market for Tein in the US... they make specific models for their market, and vice versa in Japan.

So u prob need to look at the Jap ones cos i assume they're the ones u'll most like be getting. Just my thoughts... correct me if i'm wrong ;)

[CoZZm0]

EDFC compatability sometimes relates to the required trim clearance for parts under bonnets and boot etc. My TEIN HA are listed at EDFC compatible only with piston exchange, but they are working fine with EDFC now (without having changed the pistons), but parts of the trim needed modification to fit the stepper motors in, but that's a sacrafice that i'm prepared to live with considering the convienence of having EDFC.

Also just a note that the D2's, while damper adjustable, don't have a "click" feature like the TEINs so getting even damper settings from side to side may be a bit more difficult.

[CONAN]

damn now i think tein ss is compatibile with it

www.fulcrumsuspension.com

[sydteg21]

it is compatible

[elim]

Can you slam your car 4" with Tein SS ?

[JMSBND]

You can dump 120mm

[elim]

Hectic ! Thanks JMSBND

[Chris_F]

Tein ss are compatible with the EDFC. I have them on my car and the place that installed them was keen to fit one of the units.

[me_kevinly]

thanks for the info guys :)
im not sure should i import tein SS from the US
or look for D2 from Aus

[genk-jomblo]

Can you slam your car 4" with Tein SS ?
nope .. max 2.00" .. correct me if i'm wrong ... with coilover you cna't go 'that low'.

[me_kevinly]

nope .. max 2.00" .. correct me if i'm wrong ... with coilover you cna't go 'that low'.

you can go lower something like 3.2"

[genk-jomblo]

you can go lower something like 3.2"
dont forget to go to dedy top1 if you want to install it :P

hehe ... peace

[me_kevinly]

LOL yeah for sure
but no $$ yet!, mb ard xmas LOL