EG sway bar question

[Sitwy]

I have some question to get aftermarket rear sway bar!

I think EG sedan si came with sway bar! for 14mm....I asume

if I am going to get a aftermarket one without getting a mounting bracket ...what size of bar I should get ( it mean that to keep to use the existing mounting bracket for the new sway bar)
???
thanks

[bennjamin]

do not use the STOCK mounting for other swaybars - ONLY for the stock rear one.
If you get another rear swaybar ( 18mm or 20 etc) please purchase the proper mounting hardware to go with it ! check out www.whiteline.com.au for further info -

[Sitwy]

so what size have more balance ? 18 or 20? and any other brush I need to change?
I current only have front strut bar and will going to get a rear strut bar as well!

[aimre]

why is that ben?

[saxman]

why is that ben?
using a larger sway bar ont he stock rear subframe mounts will cause the mounts to tear out of the frame, doing plenty of damage

[type one]

using a larger sway bar ont he stock rear subframe mounts will cause the mounts to tear out of the frame, doing plenty of damage

correct - do not learn this the hard way... even with the correct reinforcement a 22mm swaybar or larger can cause damage...

stick to a 19mm with uprated bushes and it will put a smile on your face.

[bennjamin]

correct - do not learn this the hard way... even with the correct reinforcement a 22mm swaybar or larger can cause damage...

stick to a 19mm with uprated bushes and it will put a smile on your face.

my past experience with STOCK reinforcment + a 18mm swaybar lead to the mounts being ripped out on my EG5.(18mm rear bar using stock mounts + thats it.Direct bolt-in) This leads to my thinking -

"stock use for stock application ONLY"

Be 100% safe and get proper reinforcement/mounts !

*moved to our sussy forum*

[EGB16A]

slightly off topic, but is there any advantage in changing the stock front swaybar to something aftermarket?

[type one]

same idea as rear, front is a little different to rear and ITR front can be used with uprated bushes. 24mm or sth like that from memory?