PDA

View Full Version : air vent removal??



fatrex
30-01-2006, 09:58 PM
hey guys/girls :)

Got my self some carbon fibre goodies for my dc2 and just wondering how you get the middle airvent out?? its joined to the fan controls right? didnt want to force it out but i couldnt see any visible screws holding it in. Can someone point me to the right direction??

many thank yous

stanleym
31-01-2006, 08:04 AM
hey guys/girls :)

Got my self some carbon fibre goodies for my dc2 and just wondering how you get the middle airvent out?? its joined to the fan controls right? didnt want to force it out but i couldnt see any visible screws holding it in. Can someone point me to the right direction??

many thank yous


in order to remove the a/c unit i think your going on about

1. pop out the hazard lights and demister buttons from bottom with a flat head screw driver and disconnect wire frm button.

2. behind this there will be 2 screws that you then take out

3. under the passenger side dash you need to disconnect the heater cable from the cilinderal metal and disconnect from the clip hold it in place (the wire is blue)

4. you should then be able to slide out the unit a little bit inorder to find 2 more clips that need to be taken out. these clips should be grren and white
start with the green clip you can use a screwdriver going in from the bottom of a/c unit to unclip it (you may find this easier) looking from the bottom helps see's the clip you need ......then finally u just unclip the last white clip and the a/c should come away no problems

if that doesn't help you here is a step by step guide from team-integra.com

climate contorl removal enjoy=) (http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=586)

zen
31-01-2006, 08:43 AM
*in related news

the guy who owned my DC2 first must have been a dipshit because when he went to put in the new deck, it looks like he removed the air con unit as it is loose as all **** now. If im driving hard and launch or chirp second it falls out and i need to push it back in place (still pretty loose when its in).

Any recomendations? Im going to get my H.U installed properly coz its also just sitting there... you think he can fix that shit at the same time, or should i goto HONDA ???

it shits me up the wall

stanleym
31-01-2006, 08:57 AM
well i gave u the team integra right up just folow that and make sure he has put it bak the way the insrtucstions have taken it apart he might have missed a few things the 2 screws may not be big enough who knows

just have a look

as with the head unit there should be a shot for the screw to fit in where the back of the unit lines up 2 the screw just connects to the main metal harsness off the dash ... that temporary solution until u can get proper harness

fatrex
31-01-2006, 09:44 PM
thank you stanleym!

saved me from ripping apart other things to get to it :)

stanleym
01-02-2006, 07:32 AM
thank you stanleym!

saved me from ripping apart other things to get to it :)

hey man thats not a prob thats what these forums are about right

hope it helped you chammp
take it easy

Da1nONLY
03-02-2006, 12:02 PM
haha..yeah this is a biatch..long process...
i had to do this to replace ONE bulb behind the climate control unit coz it blew! :)

stanleym
03-02-2006, 02:28 PM
it can be but if u kno what you doing its like a 5 10 min job including changing the globe

once u kno how to get everything off easy as pie but then u learning and havn't been told how lil bit more time consuming

but always best to ask question on how to do it or ask some1 to do it for you

rather than breaking more then u need 2

nipnip
03-02-2006, 03:12 PM
*in related news

the guy who owned my DC2 first must have been a dipshit because when he went to put in the new deck, it looks like he removed the air con unit as it is loose as all **** now. If im driving hard and launch or chirp second it falls out and i need to push it back in place (still pretty loose when its in).

Any recomendations? Im going to get my H.U installed properly coz its also just sitting there... you think he can fix that shit at the same time, or should i goto HONDA ???

it shits me up the wall

fix it yourself, you probably need an aerpro HU mounting cradle. you can get it from supercheap/autobahn