DIY Pollen Filter - Civic FD

**Shimian** · 05-08-2007 01:11 PM

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

Aim: To install pollen filter on an FD

Required: Stanley Knife & Pollen Filter

Steps:

Now put everything back together. Things should slide and click into place. The last part where you put the latch back to the glove box, you will need to use a little bit of force to snap it back on.

Other comments:

Now you will be breathing in filtered air

**gerard** · 10-08-2007 10:11 AM

you forgot to remove the 9 pieces of panel used to provide back pressure if the filter was not fitted.

**solitz** · 10-08-2007 10:29 AM

nice diy but just add the ozhonda disclaimer and then ull be sweet

**Shimian** · 10-08-2007 05:32 PM

Originally Posted by gerard

you forgot to remove the 9 pieces of panel used to provide back pressure if the filter was not fitted.

ill look into that

**Dreams** · 10-08-2007 08:00 PM

why the F honda aus does not include pollen as standard!. aus aint that clean you know.

**Rice_4_life** · 10-08-2007 10:43 PM

cos honda sells them at amazingly insane prices

**mugeneration** · 11-08-2007 12:15 AM

How much?

**aaronng** · 11-08-2007 12:33 AM

$80-90.

**beeza** · 11-08-2007 01:32 PM

Does my 96 EK civic sedan have one of these or can I fit one?
Cheers Brett.

**gerard** · 12-08-2007 03:31 PM

you can get one from burson for under 30. its the same as the oddy's. Ryco RCA108P)

**clem** · 15-08-2007 11:44 AM

Just a question, does this filter prevent the build up of stinky shit inside your air vent? or is that totally non-related.. i've noticed that everytime i turn on the air con now, it smells like something died for about 5mins then goes away after the aircon gets goin, anyone know how to get rid of this?